Injection Resin Alternatives Australia: 7 Trusted Brands

Galaxie Polyurethane & Acrylic Injection Resins, Comparable Alternatives

Looking for injection resin alternatives in Australia? Galaxie manufactures Australian-made alternatives to Sika, Normet, MC-Bauchemie, Bluey Technologies, Parchem (Fosroc), Master Builders Solutions and Mapei polyurethane and acrylic injection resins, built to perform the same fit-for-purpose roles as those international brands on Australian civil, tunnelling and building projects. The tables below map each Galaxie product to broadly comparable products from other manufacturers, based on product type, chemistry and stated application.. The tables below map each Galaxie product to broadly comparable products from other manufacturers, based on product type, chemistry and stated application.

Basis of comparison: This comparison has been compiled from information publicly available online, including manufacturer websites and published Technical Data Sheets, as at July 2026. Products are grouped where their stated chemistry and application appear broadly similar; this is not a claim of identical formulation or performance. Specifiers and contractors should confirm suitability against the current TDS of any product before use. Product and brand names referenced — including Sika, Normet, MC-Bauchemie, Bluey Technologies, Parchem/Fosroc, Master Builders Solutions and Mapei — remain the property of their respective owners and are used here only to identify comparable products.

Water-Reactive Foaming Polyurethane Injection Resin Alternativess

Looking for injection resin alternatives to Sika Injection-107, Normet TamPur, Bluey BluRez, Fosroc Nitofill, Master Builders Solutions MasterRoc or Mapei Resfoam? Galaxie's PU Cut, PU RS and PU Flex are fast-reacting, expanding polyurethane resins manufactured in Australia for cutting off active water leaks, filling voids and stabilising saturated ground.

Galaxie Product	Type	Comparable Alternatives (Other Brands)
PU Cut	Single-shot hydrophobic PU (MDI), >20x expansion	Sika — Injection-111 PL Normet — TamPur 138 / TamPur 100 Bluey Technologies — BluRez CSW MC-Bauchemie — MC-Injekt 2133 Parchem / Fosroc — Nitofill PU130 Master Builders Solutions — MasterRoc MP 355 1K Mapei — Resfoam 1KM
PU RS	2-component rapid-setting PU, high foam strength	Normet — TamPur 125 (ECO Range) Bluey Technologies — BluRez CSW MC-Bauchemie — MC-Injekt PowerSeal G Sika — Injection-111 PL Parchem / Fosroc — Nitofill PU130 Master Builders Solutions — MasterRoc MP 355 Mapei — Resfoam 1KM HS
PU Flex	Single-shot hydrophobic PU (MDI), semi-flexible, up to 30x expansion	Sika — Injection-107 Normet — TamPur 130 (ECO Range) Bluey Technologies — BluRez CSW MC-Bauchemie — MC-Injekt 2133 Parchem / Fosroc — Nitofill PU 1F Master Builders Solutions — MasterRoc MP 358 SC Mapei — Resfoam HB 45

Flexible & Hydrophilic Injection Resin Alternatives

Looking for injection resin alternatives to Sika Injection-201 CE, MC-Bauchemie's MC-Injekt 2300 range, Bluey's BluRez CS150, Fosroc's Nitofill PU150, Master Builders Solutions MasterRoc MP 350 or Mapei's Resfoam HL 35? Galaxie's PU FlexGel, PU SF and PU SF MDI are non-foaming or low-expansion polyurethane systems for permanent, flexible waterproofing of moving joints, tunnel gaskets and structural cracks under hydrostatic pressure.

Galaxie Product	Type	Comparable Alternatives (Other Brands)
PU FlexGel	2-component PU, non-foaming, flexible gel	Sika — Injection-201 CE MC-Bauchemie — MC-Injekt 2300 top / MC-Injekt 2300 flow MC-Bauchemie — MC-Montan Injekt DS Parchem / Fosroc — Nitofill UR63 Master Builders Solutions — MasterRoc MP 350 Mapei — Resfoam HL 35
PU SF	Single-component hydrophilic PU (TDI), super flexible, low expansion	Normet — TamPur 150 Bluey Technologies — BluRez CS150 MC-Bauchemie — MC-Injekt PowerSeal G Sika — Injection-201 CE Parchem / Fosroc — Nitofill PU150 Master Builders Solutions — MasterRoc MP 350 Mapei — Resfoam HL 35
PU SF MDI	Single-component hydrophilic PU (MDI), super flexible, low expansion	Normet — TamPur 150 (ECO Range) Bluey Technologies — BluRez CS150 MC-Bauchemie — MC-Injekt PowerSeal G Parchem / Fosroc — Nitofill PU140 Master Builders Solutions — MasterRoc MP 350 Mapei — Resfoam HL 35

Acrylic Injection Resin Alternatives

Looking for injection resin alternatives to Sika Injection-306, Normet's TamAcryl range, MC-Bauchemie's MC-Injekt GL-95 TX, Master Builders Solutions MasterRoc acrylics or Mapei's Mapegel UTT System in Australia? Galaxie AC200 and AC300 are ultra-low viscosity, non-corrosive acrylic gels for fine crack sealing, curtain grouting and soil stabilisation.

Galaxie Product	Type	Comparable Alternatives (Other Brands)
AC200 / AC200 EST	Acrylic injection resin, swells up to 50%	Sika — Injection-306 Normet — TamAcryl 2000 MC-Bauchemie — MC-Injekt GL-95 TX Master Builders Solutions — MasterRoc MP 303 CE Mapei — Mapegel UTT System
AC300 / AC300 EST	Reinforced acrylic injection resin, tough flexible gel	Normet — TamAcryl 3000 / TamAcryl 4000 MC-Bauchemie — MC-Injekt GL-95 TX Master Builders Solutions — MasterRoc MP 300 Mapei — Mapegel UTT System

Comparison compiled July 2026 from publicly available manufacturer websites and Technical Data Sheets. Galaxie is not affiliated with, endorsed by, or a licensee of Sika, Normet, MC-Bauchemie, Bluey Technologies, Parchem/Fosroc, Master Builders Solutions or Mapei. All trademarks remain the property of their respective owners. This page is intended as a general guide to injection resin alternatives available in the Australian market. For full technical specifications, download the current Galaxie TDS and SDS for each product, or contact Galaxie's technical team to confirm fit for purpose on your project. Many of the products referenced are tested to the EN 1504-5 standard for concrete injection.